evo da odgovorim samome sebi
The rain sensor A-fig. 55, located behind the driving mirror, is an electronic device combined with the windscreen wiper which has the purpose of automatically
adjusting the number of wipes to intensity of the rain. All the other functions controlled by the right-hand stalk remain unchanged.
The rain sensor is activated automatically moving the right-hand stalk to position 1-fig. 54 and it has a range of adjustment that gradually varies between
wiper stationary (no wiping) when the windscreen is dry, to wiper at second speed (continuous, medium wiping) with heavy rain.
Turning the knurled ring A-fig. 54 it is possible to increase the sensitivity ofthe rain sensor, obtaining a quicker change from stationary (no wiping)
when the windscreen is dry, to first continuous speed (continuous, slow). A further stroke will confirm operation. Operating the windscreen washer with
the rain sensor activated (stalk at position 1-fig. 54) the normal washing cycle is performed at the end of which the rain sensor resumes its normal automatic
function. Removing the electronic key from the ignition device, the rain sensor is deactivated and the next time the engine is started it will not be reactivated even if
the stalk has remained in position 1- fig. 54. In this case to activate the rain sensor, simply move the stalk to 0 or 2 and then back to 1.
When the rain sensor is reactivated in this way, the wiper performs one stroke, even if the windscreen is dry, to indicate that reactivation has occurred.
